Products

It’s specially formulated to obtain waterproof of easy application, sure, economic and durable in vertical or horizontal surfaces. It does not need special application techniques and can be applied very easily.

· Uses
· Surface preparation
· Instructions for use
· Consumption
· Colours
· Packing and storing
· Hygiene and safety
· Specification

Last update: 21/10/2008

Uses

To waterproof roofs, walls, skylights, repairs in fibrocement roofs, etc. and all kinds of materials which require to be waterproofed.

Surface preparation

In old surfaces, first eliminate the remainders of bad stuck particles and other impurities such as dust, mosses, moisture, oils, and greases, remainders of paints or waterproofing nettings. The remainders of working materials can be eliminated with DESCAL, rinsing with a lot of water and letting it dry. Apply the product with temperatures between 5º and 35ºC, and foreseeing it will not rain. Excessive paint thickness may affect the right drying. In very porous surfaces or those with tendency to crumble it is recommended to apply a previous coat of our product PRIMA 68.

Instructions for use

The product application does not need difficult techniques. As it is a viscous paste but not tough it can be applied with brush, paint roller, trowel, etc.
A fibre-glass netting can be placed, between coatings, in order to increase its mechanical resistance in places such as dilation joints or fissures.
When the product is applied in terraces it is recommended to extent it in the surrounding walls making a baseboard of 15-20 cm from the floor.

Consumption

Apply different coatings until you achieve a consumption of 2 Kg/m².
With fibre-glass netting, 4 Kg/m² apply in different coatings.

Colours

White, red, grey, red ceramic and Aragon red tile. Over 700 Kg. the colour can be over demand.

Packing and storing

IMCA is packed in hermetic barrels, according to EC packing and storing directives for chemical products. Professional use.

Hygiene and safety

See product label.

Specification

pH: 8.5 ± 0.5
Viscosity (A4-V10 25ºC):250±25P.
Dry Extract (auto, 120ºC): 69±3%
Specific weight at 20ºC:1.35±0.05gr./ml
Fine (Hegman): 4-5
Dry to touch (250 microns, glass, 25ºC): 35-45 minutes
Total Dry (250 microns, glass, 25ºC): 3±0,5 hours.
Elasticity :> 250%
Water steam permeability:Very good.
Heat resistance:50ºC
Cold resistance:≤+5ºC
Weatherproof resistance:Very good.

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.