PROTECTOR M

Transparent water-repellent especially designed for one layer mortars.


Colorless water-repellent especially designed for the treatment over one layer cements, cements based in lime, stuccoeds or other plaster finishes. Made of organic resins, steady and resisntant to ultraviolet rays and highly resistant to chemical contaminants in the atmosphere.
Excellent water and dirtness repellent without minimizing permability of the water steam.
QUALITYS:
- The appearance of the surface maintains unalterable, that is because PROTECTOR M seeps in the base.
- Improves the aesthetic, avoiding the apartition of rashes.
- Cheap, one only application is needed.
- Easy to apply, its presented ready to use.
-In very cold zones protects surfaces from the freezing and thaw cycles.

Uses

Especially specified for the process of hydrophobicity in all surfaces with porosity or semiporosity made of a one layer mortar, lime mortar, stuccoed, etc.

Surface preparation

The support must be clean and dry.
In case of rashes, ask our Technical department.
If there are fissures or cracks, repair them before the application of the product.

Instructions for use

PROTECTOR M, must be applied pure, with brush, paint roller or an low pression airgun. One only plentifull layer must be applied, from the bottom to the top, to avoid unimpregnated zones.

Consumption

3-5 m2 per liter. It depends on the capacity of absortion and roughness of the support, as well as how it's apllied.
In case of doubt of the consume in very precise applications, it is recommended to make previous test.

Colours

Milky white.

Packing and storing

PROTECTOR M is packed in hermetic barrels, according to EC packing and storing directives for chemical products.

Hygiene and safety

See the product label.

Specification

Appearance: Milky emulsion
Solids in weight: 28±1%
Density: 1,02±0,03 g/ml
Viscosity (Brookfield): 1000±100 Cps
Estability in cold: OK
Thermical Estability: OK
Mechanical Estability: OK
TMFF: 20ºC
pH:9±0,5

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.