FASTCONCRETE

Accelerant liquid for Portland cement and mortars.


Is an accelerant liquid for Portland cement and mortars, exempt from chlorine.
This product has specially been designed with additives that allows the catalysation of moisturizing in cement, particularly in a very low temperatures. Fastconcrete does not contain chlorine which means that it can be used in any mortars or concrete, in mass or reinforced.

Uses

Fastconcrete allows to take the most of the column box in a building site, and the mould in the case of prefabricated.
The covers with FASCONCRETE does not need to be cover with another mortars.
Fastconcrete is used to accelerate the set times and increase early strength gain where job-site efficiency is important.
Is used to accelerate and strength any type of concrete and/or mortars:
submerge work in presence of water.
Maritime work.
Prefabricated.

Surface preparation

The surfaces must be clean and healthy exempts of any bad adherence particle.

Instructions for use

Its dilution is an estimate dose of FASTCONCRETE in water, depending on the speed of hardener and cement required.

Consumption

Recommended Dose:
In mortars: 1% of the cement weight, diluted in the mass water.
In concrete: 2% of the cement weight, diluted in the mass water, so is to say, with a dose of 300kg of cement in a m3, is recommended 6kg of the accelerator.

Colours

Slightly yellow liquid.

Packing and storing

FASTCONCRETE is supplied in prepared plastic barrels, according to EC packing and storing directives for chemical products. FASTCONCRETE is sensible to low temperatures, so keep FASTCONCRETE in temperatures superior to -20ºC . Professional use. Period time of keeping 24 month.

Hygiene and safety

See product label.

Specification

Aspect:Slightly yellow liquid.
Colour:Yellow.
Density (20ºC):1.37 ± 0.03 g/cm3
pH:7.0 ± 1.0.
Fixed material:50.0 ± 3.0%..
Halogenuros content: Exempt.
Freeze Point:<-25ºC.

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.