REMASTOP®

Shuter cap, quick solution for holes in formworks


REMASTOP is an innovative patented system to guarantee a total watertight in tubes and holes from the formworks or any construction in which holes need to be sealed.
HIGH QUALITY PRODUCT WITH A GUARANTEE FOR 50 YEARS, made with EPDM and galavnized steel, suitable for contact with drinkable water or other alimentary products.

Uses

REMASTOP is applied in holes from formworks to assure total watertight for a longtime, avoiding filtrations, leaks as a defect in sealing or a deterioration of the materials used previously. Also used to plugger or shutter temporarily any tube of water, heatings, etc.

Surface preparation

For this application it's only required an automatic or manual screwdriver or a spanner. It's recommended to clean the entrance of the hole to remove any remain of conrete, dust or sand to ensure a perfect contact between REMASTOP with the walls of the hole and obtain a perfect watertight.

Instructions for use

Introduce the REMASTOP in the hole and screw up till you get the nescessary expansion to seal prefectly the hole. To be used as a rawl it's possible to change the original screw for a longer one to adjust perfectly REMASTOP in the walls of the hole.

Consumption

One unit per hole.

Colours

Black, grey and white.

Packing and storing

REMASTOP is presented in packages of 500, 1000 and 5000; with the nescessary tools for its application.

Hygiene and safety

There are no specific precautions except those from the normal use of the tools.

Specification

Weight: 37,70 gramos
Length: 55 mm
Origianl Diameter: 20,8 mm
Maximum expansion: 34,90 mm
Thread: M6
Washer: DIN 9021
Nut: Selfnailing
Max resistance to preassure: 7 Bar

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.