 |
|
|
|
|
|
|
| > |
Waterproof,
Water-repellents |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FLEXIAL |
|
|
|
| Flexible aluminium sheet for the finishing off in roofs. |
|
|
|
|
|
|
| |
Flexial is an aluminium sheet lacquered in both sides specially recommended for round off in roofs. This product its available in to formats: LINEAL and 3D.
The included adhseive is an elastic mass with permanent flexibility that adapts to dilations and small movements that could afford the roofs, avoiding the sheet to get unstuck, suffering fissures or breaks and assuring the water hold back.
The lacquered of the sheet provides resistance to all weather conditions and to ultraviolet rays that insures for long time its appearance without been damaged.
Flexial is a product made of light and non harmful materials within the respect of enviorenment and the people's health.
A wide range of measures and formats will permit you to find the appropiate Flexial to resolve the multiple waterproof problems easily and safely. |
|
|
|
|
|
|
|
·. Uses |
|
| |
Joint of the roof and the chimney, alley roofs, outflows of aerials, joints of lateral and superior walls, gutters, skylights in terraces and flat roofs, slopes and inclination changes, ridges, gutters round off and covers. |
|
|
|
·. Surface preparation |
|
| |
The surface must be clean of paints, greases, oils, dust, etc. |
|
|
|
·. Instructions for use |
|
| |
FLEXIAL LINEAL: Remove the wrap and stick it while you adapt it to the roof's support.
FLEXIAL 3D (MINITEJA): Cut the sheet in relation with the chimneys wall higher and the overlap over the tiles. Remove the wrap, adapt it to the chimneys and bend the lateral part over the flap of the previous sheet.
Ristrels must be prefectly parallel. Distance beetwen ristrel and longitudinal mark should be 25 cm from each side.
FLEXIAL ALLEY (LIMAHOYA): Cut the sheet within the suited longitud. Remove the wrap, adapt it to the roofs support. Bend along the marks and fix it in the edge along the perimeter. |
|
|
|
·. Consumption |
|
| |
|
|
|
|
·. Colours |
|
| |
Produced in two colors: red tile and black. |
|
|
|
·. Packing and storing |
|
| |
FLEXIAL LINEAL and FLEXIAL 3D (MINITEJA) is presented in rolls of 20, 30 and 40 cm of wide and 5 lineal meters.
FLEXIAL ALLEY (LIMAHOYA): is presented in rolls of 60cm wide and 5 lineal meters.
ALUM BAR: is presented in units of 55cm wide and 2 lineal meters.
For its storage its essential to maintain the rolls in their original wrapping prefectly closed and sheltered in indoor conditions. |
|
|
|
·. Hygiene and safety |
|
| |
See product label. |
|
|
|
·. Specification |
|
| |
Adhesion force to concrete: no less than 0,1 Mpa.
Adhesion force to metals: no less than 0,94 Kg/cm2
Water absortion: no more than 0,02 %
Permeability to water steam: 0,15 g/m2
Temperature resistance*:-60 a +180 ºC
U.V. resistance (ASTM G87, 500 hours, U.V. - 313 4h. 60 ºC/condensation, 4h. 40 ºC): O.K.
Bending ISO1519 (OT (180ºC)): O.K.
Friction resistance (ILA - 15): O.K.
*If the product is conserved in temperatures lower than 0ºC, it should be kept during 24h at 20ºC ± 2 ºC before its application. It is recomended that the installation must be done in temperatures above 4ºC. |
|
|
| |
NOTES:
- These technical specifications, as the other recommendations and technical information, are useful only for the description of the product characteristics, instructions of use and its uses. Data information are based in our technical knowledge obtained in bibliography, laboratory essays and by our own practice.
- Consumption data and dosages which appears in these specifications are based in our own experience, so they can vary due to different conditions in the building place. Real consumption and dosages have to be determined in the building place through previous essays and they are customer responsibility.
- For further information, our Applied Construction Chemistry Department is at your disposal.
- Other uses witch do not fit with the specifications are not from our responsibility.
- We give guarantee in case of manufacturing quality problems; so excludes further reclamations and our only responsibility is to return the value of the product.
- Patents and rights must be taken into account.
- The present file losses its validity with the launching of new edition.
|
|
|
|
