 |
|
|
|
|
|
|
|
|
|
|
|
| BLUEFIX |
|
|
|
| Blue alignment fixer |
|
|
|
|
|
|
| |
Elaborated with synthetic resins, exempt from dissolvents and is compatible to any type of surfaces.
The particular size of its particles, bestow the high power of penetration to the surfaces of concrete and mortars, acting as an excellent alignment fixer, without forming a film.
|
|
|
|
|
|
|
|
·. Uses |
|
| |
BLUEFIX is an excellent blue fixer, ideal for the protection during all work alignment carry out with ruling pen. |
|
|
|
·. Surface preparation |
|
| |
The surfaces must be clean, dry, and free of grease, oils or any other contaminants that may effect the penetration of the product on the surface. |
|
|
|
·. Instructions for use |
|
| |
For its application, sprinkle with spray or sulphator, on the marked lines, and let it dry. |
|
|
|
·. Consumption |
|
| |
BLUEFIX is applied by spray with a yield of 50ml approx. Average is 50-80 ml per 1l of product. |
|
|
|
·. Colours |
|
| |
Blue. |
|
|
|
·. Packing and storing |
|
| |
BLUEFIX is presented in plastic barrels of 30 and 60 litres, according to EC packing and storing directives for chemical products. |
|
|
|
·. Hygiene and safety |
|
| |
See product label. |
|
|
|
·. Specification |
|
| |
Aspect: Bluish liquid colour.
Viscosity (Copa Ford Nº2 at 25ºC): approx 25’’
Density at 20ºC: 0, 99±0, 02 g/cm3
pH: 8,3 ± 0,8.
Dry touch at 20ºC: 15 minutes
Dry extract (auto, 10ºC, sand): 7± 1%
|
|
|
| |
NOTES:
- These technical specifications, as the other recommendations and technical information, are useful only for the description of the product characteristics, instructions of use and its uses. Data information are based in our technical knowledge obtained in bibliography, laboratory essays and by our own practice.
- Consumption data and dosages which appears in these specifications are based in our own experience, so they can vary due to different conditions in the building place. Real consumption and dosages have to be determined in the building place through previous essays and they are customer responsibility.
- For further information, our Applied Construction Chemistry Department is at your disposal.
- Other uses witch do not fit with the specifications are not from our responsibility.
- We give guarantee in case of manufacturing quality problems; so excludes further reclamations and our only responsibility is to return the value of the product.
- Patents and rights must be taken into account.
- The present file losses its validity with the launching of new edition.
|
|
|
|
|
|
|
| Pol·lígon
Industrial Pla Poligé • Tel. +34 972 68 74 09 Fax: +34
972 28 70 78 • 17854 SANT JAUME DE LLIERCA (Girona) |
|
